Correx

Lightweight with a corrugated centre (aka fluted polypropylene)

Our prices are only available to registered Trade customers. Please register for your own account, which will grant you full access to our prices and services.

If you've already got an account with us, please log in.

For a specific price on the size of your board, please use our price calculator.

Material Overview

Printed direct to substrate with UV inks
Trimmed sides as standard
Light-weight and easy to install
Flexible and durable, can be stuck, screwed, nailed or riveted to any suitable surface
Suitable for both indoor and outdoor use
Maximum board size: 2400mm × 1200mm (approx. just under 8ft × 4ft) in one piece

Although the maximum board size is 2.4m × 1.2m (approx. just under 8ft × 4ft) multiple boards can be printed and easily placed side-by-side to increase the image area.

Each item is printed and finished to your requirements.

Uses for Correx

Suitable for both indoor and outdoor use
Estate agency boards

Finishes Available for Correx

Below are the standard finishes available for this material.

Trimmed to Size

Boards will be cut to the size ordered with one of our Zünd cutting machines.

There is no charge for this finish.
Cut to Shape

Boards will be machine-cut to required shape with one of our Zünd cutting machines.

Additional cost applies for setup. Please ask for full details.
Drilled Holes

Boards can have drilled holes added, which will be machine-drilled by our Zünds.

Currently, drilled holes cannot be ordered via our website, but please let us know in your checkout notes if you require them, along with any requirements (e.g. hole diameter, distance from edges, quantity, positions).

Our standard setup is four 5mm diameter holes (one in each corner), positioned 15mm from the edges.

Our minimum drilled hole size is 3mm. We can produce holes at any size above this, though holes larger than 6mm will qualify for a shape-cut charge.

Please note, when providing a measurement for the distance to the edge, we ask for a distance-to-edge amount, rather than a distance-to-centre amount.

An additional flat cost of £10 per order applies for this finish.

For help on setting up your artwork for these finishes, please refer to our artwork setup guide.

Notice

Standard product tolerance is expansion of up to 5mm per linear metre

Please bear logistics in mind when planning your Correx order and feel free to ask our advice. The rule of thumb is that pieces bigger than 2m × 1.5m will need to be delivered by dedicated courier or by large pallet which increases the delivery costs substantially. Please call for more information on this.