We are open with reduced staff to ensure that social distancing can be adhered to.
Because of the reduced numbers, there may be some extended production times, so please do keep this in mind when ordering. However, we will be doing our very best keep this to a minimum. Please contact us if you have any questions.
A great counter to complement the SEG Pop-Up range. Easy to transport and set-up, they offer maximum impact with minimal fuss.
Each unit comes with a bespoke-printed and professionally-sewn graphic on our 210gsm Display Polyester.
SEG Fabric Pop-Up Counter
|Internet Price||Average||Local Retail|
|Name||SEG Fabric Pop-Up Counter|
Please note, due to the nature of fabrics that are not completely opaque, when these graphics are subject to strong lighting (especially from above or behind), some visibility of the frame through the graphic is possible. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit.
While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between sides.
|SEG Fabric Pop-Up Counter|
These templates will help you create your design at the correct size, shape and proportion for the SEG Fabric Pop-Up Counter, and are setup at 20% scale of full size.
Artwork must be supplied:
Please also refer to our full list of artwork requirements.
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic. When the graphic is fitted to the unit, stitches are only visible from the rear of the unit.
Rather than one continuous graphic wrapping the entire unit, a separate physical graphic is produced for each side of the unit (three for a single sided unit; four for a double-sided unit). This is due to 10mm-wide portions of the frame that connect from the top to bottom of the unit on each corner, which are not covered. These portions of the frame (gaps inbetween graphics) are indicated by the vertical guides. Please use this template to supply one, large artwork - we will handle the rest.
Important content, such as logos and text, should not escape the safe areas. Please bear in mind the shape and curvature of the fitted graphic when creating your design.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
Get full access to our Trade-only prices and services with your own account.
We are currently open