A premium quality, double-sided unit which is perfect for when a roller banner is not standing against a wall and can be viewed from both sides. Why waste a marketing opportunity?
There is a single pole for this unit which supports both graphics.
As this product features a two graphics, two separate designs can be supplied (one for each side) at no extra cost.
The price of our roller banners are the same when ordering 1 or 20 so that you don't miss out on our low prices when ordering a single unit
Edge 2 850
Edge 2 1000
What You Get
An Edge 2 roller banner unit with either two 850mm wide or two 1000mm wide, bespoke printed graphics attached and rolled within the unit
Snap-clip top rail, attached to graphics
Support pole for Edge 2 roller banner graphic
Carry bag for roller banner unit
1 year warranty (30 day full-warranty, 'return-to-base warranty' thereafter)
Edge 2 850
Edge 2 1000
Visible Graphic Width
Visible Graphic Height
The Roller Banner Market
The market for roller banners is very large and lucrative, but a quick look online will illustrate a huge difference in prices and specifications. How do you price your products to be competitive?
Some retailers will show a budget roller banner at around the £50 mark, some with free delivery - how can they do this? Easy, have a look at the graphic panel specification and you'll see they are using standard PVC. However, change the material to a lay-flat, light-stop graphic and the price increases significantly. There are a number of problems with using standard PVC: firstly the graphic will not sit flat as shown in their pictures, it will curl quite dramatically on the left and right-hand edges. Also, if there's any light behind the unit, you'll see the shadow of the pole running down the centre of the graphic, rendering the unit as good as unusable.
All of our roller banners are printed onto our grey-backed SoFlat, light-stop material whether the unit is a budget Raptor or a premium Frontier. In addition, all of our roller banner graphics are printed on our VUTEk GSes, which are the large-format equivalent of a Rolls Royce, so our print quality is always superb.
These templates will help you create your design at the correct size, shape and proportion for the Edge 2 Roller Banner, and are setup at 20% scale of full size.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn't interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.