For a specific price on the size of your board, please use our price calculator.
Although the maximum board size is 2400mm × 1220mm (equivalent to 8ft × 4ft) multiple boards can be printed and easily placed side-by-side to increase the image area.
As the Foamex is lightweight, it can be easily installed with adhesive or strong double-sided tape as well as having the durability to be screwed straight through.
Our Foamex is finished by printing onto Self-Adhesive Vinyl, which is then applied to the board. This is to ensure the best quality print. After finishing and cutting, the SAV is not noticeable on the Foamex.
As with any foam-based products, please be aware of possible expansion in heated conditions and direct sunlight. If there is no room for expansion (if it is within a frame) this can cause the product to warp.
Standard product tolerance is expansion of up to 5mm per linear metre
Each item is printed and finished to your requirements.
Below are the standard finishes available for this material.
Boards will be cut to the size ordered with one of our Zünd cutting machines.
There is no charge for this finish.
Boards will be machine-cut to required shape with one of our Zünd cutting machines.
Additional cost applies for setup. Please ask for full details.
Boards can be either gloss (anti-graffiti), matt or dry-wipe laminated. Please select your desired lamination option in the price calculator.
An additional charge per square metre for gloss and matt lamination applies.
An additional charge per square metre for dry-wipe lamination applies.
Boards can have drilled holes added, which will be machine-drilled by our Zünds.
Currently, drilled holes cannot be ordered via our website, but please let us know in your checkout notes if you require them, along with any requirements (e.g. hole diameter, distance from edges, quantity, positions).
Our standard setup is four 5mm diameter holes (one in each corner), positioned 15mm from the edges.
Our minimum drilled hole size is 3mm. We can produce holes at any size above this, though holes larger than 6mm will qualify for a shape-cut charge.
Please note, when providing a measurement for the distance to the edge, we ask for a distance-to-edge amount, rather than a distance-to-centre amount.
An additional flat cost of £10 per order applies for this finish.
For help on setting up your artwork for these finishes, please refer to our artwork setup guide.
Please bear logistics in mind when planning your Foamex order and feel free to ask our advice. The rule of thumb is that large boards could need to be delivered by dedicated courier or by large pallet, which increases delivery costs substantially. Please call for more information on this.
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
Get full access to our Trade-only prices and services with your own account.
We are currently closed
Please feel free to email us, and we'll get back to you on Monday.
© Copyright 2020 Venture Display Limited.
All rights reserved.