Counta is an extremely cost-effective demonstrator unit that is lightweight, portable and simple to assemble. The header and base are branded using self-adhesive vinyl to give a vibrant and hard-wearing finish.
The unit header and base come complete with your fitted graphics, in a carry bag and ready to put together out of the box.
The base graphic is comprised of one wide graphic split into three pieces (left side, center and right side).
|Height To Counter
|Header Graphic Size
|770mm (W) × 290mm (H)
|Base Graphic Size
|1567mm (W) × 844mm (H)
The base graphic does not wrap around the corner folds. The graphic size includes two 7mm-wide vertical gutters, which allow for the corners. These will show as white edges from top to bottom when assembled.
|Counta Base Template
|Counta Header Template
These templates were last updated on 16/12/2021. If you have previously downloaded templates for the Counta before this date, please disregard them and use the latest versions. If old templates are used, this will likely delay any orders.
These templates will help you create your design at the correct size, shape and proportion for the Counta, and are setup at 20% scale of full size.
Header and base artworks must each be supplied.
The small areas indicated by the margins/guides at the top and bottom of the base will be completely concealed by the unit. Please only use these areas to bleed any background colours or images.
The central area will become the front graphic. The left and right areas will become the sides and will only be visible from the sides of the unit.
Please note the gaps between the center and side graphics. These areas (7mm width) will not be printed and will instead be used as a gutter for the folds of the corners.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.