Mesh PVC
Formerly named 340gsm PVC. Ideal for building wraps and very large banners.
How Much Does It Cost?
Our prices are only available to registered Trade customers. Please register for your own account, which will grant you full access to our prices and services.
If you've already got an account with us, please log in.
For a specific price on the size of your banner, please use our price calculator.
Material Overview
- Printed on fine 290gsm PVC Mesh
- 37% air flow-through
- Offers enhanced image compared to other mesh
- M1/B1 fire-rated to comply with UK and European fire safety standards
- Standard finishing included
- Printed with fade-proof UV-based inks
Each banner is printed and finished to your requirements.
Our Mesh PVC material is ideal for use on scaffolding or large building wraps, as well as Heras Fencing Banners and Crowd Control Barriers.
The mesh banner material is 37% open to allow air to pass through, creating less stress on the banner itself. The mesh also allows a certain amount of light through so that when used on buildings, windows are not left completely darkened.
Mesh is lighter than standard banner material which means it could be more suited where weight is an issue, such as installation or the protection of the surface it is being fixed to.
Uses for Mesh PVC
- Scaffolding and very large banners
- Medium and large-format advertising
- Building wraps (banners that can cover building sides)
- Heras fencing banners
Mesh PVC is perfect for building displays where size is important and weight could be an issue.
Looking for Heras Fencing Banners?
-
For best results, please see our standalone product: Heras Fencing Banners.
Alternatively, these can be ordered with square corners through our price calculator: example calculation for 3375mm x 1780mm
Finishes Available for Mesh PVC
Below are the standard finishes available for this material. There are no additional charges for these finishes.
-
Hems & Eyelets
Banners will be given a welded hem, then eyeletted at equal distributions along the hem.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that’s no problem at all - simply let us know what you need when you place your order.
There is no charge for this finish.
-
Hems & Corner-Only Eyelets
Banners will be given a welded hem, then eyeletted in the four corners, within the hem.
There is no charge for this finish.
-
Hems Only
Banners will be given a 53mm welded hem.
There is no charge for this finish.
-
Trimmed to Size
Banners will be cut to the size ordered.
There is no charge for this finish.
-
Trimmed with Eyelets
Same as Trimmed to Size but with the addition of eyelets.
-
Pole Pockets
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
For help on setting up your artwork for these finishes, please refer to our artwork setup guide.
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.