Scaffold Banners

Product Overview

Ready-to-order banners, perfect for use on scaffolding, with suitably-sized pole pockets at top and bottom.

Providing scaffolding, construction, renovation and building maintenance companies with the perfect way to advertise their brand during building works.

Printed on either Double-Sided Block-Out PVC, Standard PVC, Premium PVC, Fabric Mesh Polyester, AirMesh Polyester or Flag (Knitted Polyester).

Pole Pocket Sizing

Pockets are sized at 60mm diameter to easily accommodate a standard scaffold pole.

As with our bespoke banners, pole pockets are inclusive of overall size (not in addition to overall size). So a 1m × 1m banner is 1m tall from the top of the top pocket, to the bottom of the bottom pocket. This means the usable and recommended face/safe area on the banners around 400mm less than the overall height of the banner.

Finishing

PVC-based banners are high-frequency welded at top and bottom to create the pole pockets, and trimmed on the sides.

Fabric banners have stitched pole pockets on the top and bottom, and hems on the sides.

Sometimes eyelets in the welds/joins are required on one side of the banner. If this is the case for your banner, please let us know when ordering and we will add these free of charge.

Bespoke Sizes and Scaffold Wraps

While the sizes listed above have been 'pre-made' for convenience, we can produce Scaffold Banners at any bespoke size.

If the size you need is not listed above, please use our price calculator to get a quote for any bespoke size. For example:

• 800mm × 2000mm Standard PVC banner
• 800mm × 2000mm Double-Sided PVC banner
• 600mm × 1800mm Double-Sided PVC banner
• 600mm × 1000mm Double-Sided PVC banner
• 8m × 2m AirMesh Polyester banner

Measurements