Email

SEG Fabric Wall-Mounted Lightboxes

  • Frame Quality

Product Overview

Really make your customer's message stand out with these backlit displays, giving your artwork unparalleled vibrancy.

Wall-mounted backlit tension fabric systems are similar to their free-standing counterpart, in that they consist of an aluminium extrusion frame kit. The frame is 75mm thick for the standard and 60mm thick for the premium, and is fitted to the wall.

A fabric graphic, printed dye-sublimation onto 310gsm Backlit Polyester for great image vibrancy and finished with a silicone edging (kedar), is then slotted into the aluminium channel and tensioned around the edge.

The result is a beautifully-finished and seamless branding solution that is perfect for store displays or exhibitions. Replacement graphics are folded and sent via courier in a jiffy bag and are easily replaceable by existing ground staff, negating the need for skilled installers.

Differences between premium and standard are based around the lumens, quality and number of LEDs used. Wall-mounted Lightboxes are edge-lit, which means the LED lights are located around the inside edge. Premium Lightboxes have lights along the long edges for better light quality. Premium Lightboxes can also be provided with a backlit board for larger displays but this is additional cost and does require some skilled installation. Lightboxes are supplies in sections and require some assembly with an allen key (provided).

The graphics are printed with a FabriVU 340 which gives you a rich, vibrant finish and are excellent for exhibition and indoor displays.

Each Lightbox graphic is finished with a nylon pull tab as standard. This aids easy removal of the graphic from the frame, which can be tricky without a pull tab. By default, this is affixed to an upper corner of the graphic to prevent children reaching it. Please let us know if you would prefer the pull tab to be located elsewhere or not supplied at all.

Power cable length is approximately 3m. If you require a different length, please enquire.

Please be aware that edge-lit Lightboxes work best with busy, vibrant designs. Plain and single-colour designs can highlight lighting anomalies.

Premium Lightboxes can be requested at bespoke sizes and larger than show here - please ask us for a quotation.

What You Get

  • Aluminium frame components
  • LED lights (already attached to the inside of the frame)
  • UK power cable with transformer and fitted plug
  • Allen key
  • 1 × dye-sublimation printed graphic
  • 1 year warranty (30 day full-warranty, 'return-to-base warranty' thereafter)

Replacement Graphics

Need new graphics without the hardware? Replacement graphics are available at a greatly-reduced cost. Printed, finished and delivered direct to you or your client. Available from £52.

Measurements

Notice

We do not provide a wall-mounting kit and the aluminium frame does not have any fixing points - this is because the fixing points can vary depending on the surface the frame is being fitted to. You will need to drill the frame in the desired location to create your own fixing points.

  • SEG Fabric Standard Wall-Mounted Lightboxes (Lights On)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Lights On)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Lights Off)
  • SEG Fabric Premium Wall-Mounted Lightboxes (Lights On)
  • SEG Fabric Premium Wall-Mounted Lightboxes (Lights Off)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Lights On Close-up)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Lights Off Close-up)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Graphic Peeled and Lights)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Graphic Corner Peeled)
  • SEG Fabric Standard Wall-Mounted Lightboxes (Print Quality)
  • SEG Fabric Standard Wall-Mounted Lightboxes (No Graphic, Lights Off)
  • SEG Fabric Standard Wall-Mounted Lightboxes (No Graphic, Lit Room, Lights On)
  • SEG Fabric Standard Wall-Mounted Lightboxes (No Graphic, Dark Room, Lights On)
  • SEG Fabric Premium Wall-Mounted Lightboxes (Graphic Peeled, Top Corner)
  • SEG Fabric Premium Wall-Mounted Lightboxes (Inside Lights)
  • SEG Fabric Premium Wall-Mounted Lightboxes (Graphic Peeled)

Artwork Templates

INDD AI EPS PDF
SEG Fabric Graphic (1m × 2m)
SEG Fabric Graphic (2m × 2m)
SEG Fabric Graphic (3m × 2m)

These templates will help you create your design at the correct size, shape and proportion for the SEG Fabric Wall-Mounted Lightboxes, and are setup at 100% scale of full size.

Shape

  • The red line is the bleed line. Artwork must extend to this line. The areas in between this line and the safe area line must only be used as a quiet area.
  • The purple line is the cut line. This is the perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for silicone edging.
  • The blue line is the approx. finished line. This is the approximate perimeter of the visible graphic area, after the graphic has been fitted to the unit.
  • The green line is the safe area line. Important content (text, logos etc.) must be kept within these lines.

Layers

Please note, these templates contain a locked layer that is set to be non-printing (.ai, .eps, .idml). Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.

  • Guides (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
  • Design. Must be used to create and supply your design.

Artwork Requirements

Artwork must be supplied:

  • At the exact size of this template
  • With all fonts outlined
  • With all images embedded
  • With all design elements on the Design layer
  • With background/quiet content all the way to the bleed line(s)
  • With all important content inside the safe area(s)
  • With none of the template guide lines included or flattened
  • With no crop marks, bleed marks, colour bars or other registration marks present
  • As either PDF (preferred), AI or EPS format
  • With exported files checked (e.g. in Adobe Acrobat/Reader) that all design elements are included

Please also refer to our full list of artwork requirements.

Considerations

Please bear in mind that due to potential movement, shrinkage, and expansion during printing, calenderisation, cutting, finishing and fitting, we highly recommend avoiding the use of framed borders and other design elements that follow or rely on distance to the perimeter of the graphic. Doing so would run the risk of a visually uneven edge as we cannot guarantee even borders when cut.

For back-lit graphics only: please be aware that edge-lit lightboxes work best with busy, vibrant designs. Plain and single-colour designs can highlight lighting anomalies.

Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.

Marketing and Re-Sale Resources

Please log in to view our marketing resources.
If you do not have an account with us please register now.

Image Downloads

Please log in to view our image downloads.
If you do not have an account with us please register now.

Price Calculator

Price Calculator

Sorry, our Price Calculator is only available to registered Trade customers.

Please log in, or register now for an account.

Contact Us

We are currently closed

Please feel free to email us, and we'll get back to you tomorrow. Our opening times can be found on our contact page.

Price Calculator

Price Calculator

Sorry, our Price Calculator is only available to registered Trade customers.

For your own account, register now.

If you already have an account with us, please log in again.