Replacement Graphics for Torque Indoor Banner Stand
These replacement graphics are all you need to completely re-skin a Torque Indoor Banner Stand.
UNIT NOT INCLUDED WITH REPLACEMENT GRAPHICS.
- 2400mm × 2400mm bespoke-printed graphic on either 440gsm PVC, 740gsm Blockout PVC, or Display Polyester.
- Graphic supplied with 40mm diameter pole pockets along top and bottom edges
As the double-sided version of this product features a double-sided graphic, two separate designs can be supplied (one for each side) at no extra cost (versus one design on both sides).
Please note, our replacement graphics are specifically designed and sized for product hardware that we sell. Using our replacement graphics on hardware that is not from us or not completely identical to ours may result in non-fitting or ill-fitting graphics.
If you are ordering replacement graphics for a unit you have previously purchased form us, please quote the original order ID. This will aid us in ensuring you have the most suitable replacement graphic for the hardware. This is especially important in cases where supplier hardware has altered slightly in the past, and where our latest templates may not be the required size for your model.
|Torque (Single-Sided) (2400mm × 2400mm) Template
|Torque (Double-Sided) (2400mm × 2400mm) Template
These templates will help you create your design(s) at the correct size, shape and proportion for the Replacement Graphics for Torque Indoor Banner Stand, and are setup at 20% scale of full size.
The top and bottom sections (indicated by the margins) will become the front of the pole pockets and should only be used as quiet areas (background colours/images). Any important content (text/logos) should be kept between the margins.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.