For a specific price on the size of your banner, please use our price calculator.
Each banner is printed and finished to your requirements.
Below are the standard finishes available for this material. There are no additional charges for these finishes.
Banners will be given a welded hem, then eyeletted at equal distributions along the hem.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that’s no problem at all - simply let us know what you need when you place your order.
There is no charge for this finish.
Banners will be given a 53mm welded hem.
There is no charge for this finish.
Banners will be cut to the size ordered.
There is no charge for this finish.
Same as Trimmed to Size but with the addition of eyelets.
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
For help on setting up your artwork for these finishes, please refer to our artwork setup guide.
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
Get full access to our Trade-only prices and services with your own account.
We are currently open
If you have any questions, please email us or give us a call.
© Copyright 2021 Venture Display Limited.
All rights reserved.