PVC-Free Mesh Banner
Ideal for building wraps and very large banners
How Much Does It Cost?
Our prices are only available to registered Trade customers. Please register for your own account, which will grant you full access to our prices and services.
If you've already got an account with us, please log in.
For a specific price on the size of your banner, please use our price calculator.
Material Overview
- Printed on 210gsm PVC-Free Mesh
- B1 fire-rated
- Standard finishing included
- Printed with fade-resistant UV-based inks
Each banner is printed and finished to your requirements.
Our PVC-Free Mesh Banner material is ideal for use on scaffolding, as well as Heras Fencing and Crowd Control Barriers.
The mesh also allows a certain amount of light through so that when used on buildings, windows are not left completely darkened.
Mesh is lighter than standard banner material which means it could be more suited where weight is an issue, such as installation or the protection of the surface it is being fixed to.
Can be responsibly put into landfill as the material does not release harmful bioaccumulative toxins like mercury, dioxins and furans as it breaks down.
Please note, as this is a newer material with initially lower volumes, we are ganging all print and printing on this material once per week. This means turnaround can be from 3 to 9 working days, depending when ordered in the week. Printing frequency will increase over time as ordered volumes rise.
Each banner is printed and finished to your requirements.
Please note, PVC-Free Mesh Banner cannot currently be bar-welded, and so cannot be used for pole pockets or welded oversized banners. Banners will be limited to approx 3m on the shortest edge.
Uses for PVC-Free Mesh Banner
- Scaffolding banners
- Heras fencing banners
- Crowd-control banners
Finishes Available for PVC-Free Mesh Banner
Below are the standard finishes available for this material. There are no additional charges for these finishes.
-
Hems & Eyelets
Banners will be given a welded hem, then eyeletted at equal distributions along the hem.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that’s no problem at all - simply let us know what you need when you place your order.
There is no charge for this finish.
-
Hems & Corner-Only Eyelets
Banners will be given a welded hem, then eyeletted in the four corners, within the hem.
There is no charge for this finish.
-
Hems Only
Banners will be given a 53mm welded hem.
There is no charge for this finish.
For help on setting up your artwork for these finishes, please refer to our artwork setup guide.
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
Artwork Templates
| INDD | AI | EPS | ||||
|---|---|---|---|---|---|---|
| Heras Fencing Banner with 130mm Angled Corners (3375mm x 1780mm) Template | ||||||
| Heras Fencing Banner (3375mm x 1780mm) Template | ||||||
