Standard PVC
Formerly named 440gsm PVC. Our most popular outdoor banner‑grade material.
How Much Does It Cost?
Our prices are only available to registered Trade customers. Please register for your own account, which will grant you full access to our prices and services.
If you've already got an account with us, please log in.
For a specific price on the size of your banner, please use our price calculator.
Material Overview
- Industry standard banner-grade PVC
- Suitable for both indoor and outdoor use
- High-quality full-colour print
- Standard finishing included
- Printed with fade-proof UV-based inks
Each banner is printed and finished to your requirements.
This is the most popular type of banner and has a multitude of uses at a variety of events, such as advertising banners, street campaign/event banners, corporate event banners, sporting event banners, birthday banners, party banners, etc.
Uses for Standard PVC
- Both indoor and outdoor use
- Medium and large-format advertising
- Exhibition displays
Standard PVC is so versatile its uses are innumerable. It can be used for almost any marketing purpose.
Finishes Available for Standard PVC
Below are the standard finishes available for this material. There are no additional charges for these finishes.
-
Hems & Eyelets
Banners will be given a welded hem, then eyeletted at equal distributions along the hem.
The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that’s no problem at all - simply let us know what you need when you place your order.
There is no charge for this finish.
-
Hems & Corner-Only Eyelets
Banners will be given a welded hem, then eyeletted in the four corners, within the hem.
There is no charge for this finish.
-
Hems Only
Banners will be given a 53mm welded hem.
There is no charge for this finish.
-
Trimmed to Size
Banners will be cut to the size ordered.
There is no charge for this finish.
-
Trimmed with Eyelets
Same as Trimmed to Size but with the addition of eyelets.
-
Pole Pockets
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
For help on setting up your artwork for these finishes, please refer to our artwork setup guide.
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
