Replacement Graphics for Fabric Exhibition Solutions
Product Overview
These replacement graphics are all you need to completely re-skin a Fabric Exhibition Solutions Wall.
UNIT NOT INCLUDED WITH REPLACEMENT GRAPHICS.
- Bespoke-printed graphic printed on Stretch Fabric.
- Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost.
- Both single-sided and double-sided graphics include a zip along the bottom.
- Printed in-house on a VUTEk FabriVU 340.
- Finished in-house by our team of sewing machinists.
There is no additional charge for more than one design or artwork for your order, no matter how many graphics you are ordering or whether you are ordering single-sided or double-sided graphics.
Notice
Please note, our replacement graphics are specifically designed and sized for product hardware that we sell. Using our replacement graphics on hardware that is not from us or not completely identical to ours may result in non-fitting or ill-fitting graphics.
If you are ordering replacement graphics for a unit you have previously purchased from us, please quote the original order ID. This will aid us in ensuring you have the most suitable replacement graphic for the hardware. This is especially important in cases where supplier hardware has altered slightly in the past, and where our latest templates may not be the required size for your model.
Please note, due to the nature of fabrics that are not completely opaque, when these graphics are subject to strong lighting (especially from above or behind), some visibility of the frame through the graphic is possible. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit.
Using a double-sided graphic (with a design on the rear) can reduce the vibrancy of the front graphic in certain conditions such as strong lighting. If the full vibrancy of the front graphic is desired, we recommend ordering a single-sided graphic with a white back.
While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics.
Our graphics are specifically made to cater for our finishing methods, material characteristics and frame sizes. We advise against using our graphics with frames from other suppliers, as they will likely not be compatible.
Graphics can be washed in a regular washing machine on a 30° wash without detergents. Always allow graphics to completely dry before using or storing.
Artwork Templates
| INDD | AI | EPS | ||||
|---|---|---|---|---|---|---|
| Fabric Exhibition Solution (1m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (1m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (1.5m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (1.5m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (2m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (2m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (3m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (3m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (4m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (4m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (5m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (5m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (6m, Straight, Single-Sided) | ||||||
| Fabric Exhibition Solution (6m, Straight, Double-Sided) | ||||||
| Fabric Exhibition Solution (2.5m, Curved, Single-Sided) | ||||||
| Fabric Exhibition Solution (2.5m, Curved, Double-Sided) | ||||||
| Fabric Exhibition Solution (3m, Curved, Single-Sided) | ||||||
| Fabric Exhibition Solution (3m, Curved, Double-Sided) | ||||||
| Fabric Exhibition Solution (4m, Curved, Single-Sided) | ||||||
| Fabric Exhibition Solution (4m, Curved, Double-Sided) | ||||||
| Fabric Exhibition Solution (5m, Curved, Single-Sided) | ||||||
| Fabric Exhibition Solution (5m, Curved, Double-Sided) | ||||||
| Fabric Exhibition Solution (6m, Curved, Single-Sided) | ||||||
| Fabric Exhibition Solution (6m, Curved, Double-Sided) | ||||||
These templates will help you create your design at the correct size, shape and proportion for the Replacement Graphics for Fabric Exhibition Solutions, and are setup at 20% scale of full size.
This templates are 20% scale of full size, and must not be re-sized or scaled.
Shape
- The red line is the bleed line. Artwork must extend to this line. Any space between this line and the safe area line must only be used as a quiet area.
- The blue line is the finished line. This is the approximate perimeter of the visible area, after the graphic has been fitted to the unit.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area(s)
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With all template elements and text removed
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked (e.g. in Adobe Acrobat/Reader) that all design elements are included as intended
- With artwork for both sides included (applies to double-sided versions only)
Please also refer to our full list of artwork requirements.
Considerations
While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced and cannot always be avoided. For this reason, important content, such as logos and text, should not escape the safe areas, and we highly recommend not attempting to span continuous or detailed shapes/lines/patterns/images/borders between front/rear or joining graphics.
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic. The only visible stitching when fitted is at the top and bottom of the left and right sides.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
