Replacement Graphics for Impact Hop-Up
Product Overview
These replacement graphics are all you need to completely re-skin an existing Impact Hop-Up. This can be a more cost-effective way of prolonging already-purchased exhibition and display units.
Frame unit and carry bag not included with replacement graphics.
Notice
Please note, our replacement graphics are specifically designed and sized for product hardware that we sell. Using our replacement graphics on hardware that is not from us or not completely identical to ours may result in non-fitting or ill-fitting graphics.
If you are ordering replacement graphics for a unit you have previously purchased form us, please quote the original order ID. This will aid us in ensuring you have the most suitable replacement graphic for the hardware. This is especially important in cases where supplier hardware has altered slightly in the past, and where our latest templates may not be the required size for your model.
While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we recommend not using the corners of the graphic as dividers of different colours or backgrounds.
Artwork Templates
| INDD | AI | EPS | ||||
|---|---|---|---|---|---|---|
| 2×3 Impact Hop-Up | ||||||
| 3×3 Impact Hop-Up | ||||||
| 4×3 Impact Hop-Up | ||||||
| 5×3 Impact Hop-Up | ||||||
These templates were last updated on 17/04/2018. If you have previously downloaded templates for the Impact Hop-Up before this date, please disregard them and use these latest versions. If old templates are used, this will likely delay any orders.
These templates will help you create your design at the correct size, shape and proportion for the Replacement Graphics for Impact Hop-Up, and are setup at 20% scale of full size.
Shape
- The red line is the bleed line. This is the perimeter of the cut graphic area, before any finishing. The area inbetween this line and the finished line will be used for hems, before any velcro is applied.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the velcro has been added.
- The green dashed lines are the safe area lines. Important content (text, logos etc.) must be kept within these areas.
- The grey lines are the stitching lines. This is the location of the stitching once the velcro is affixed to the rear of the graphic. This is on a separate layer that can be viewed, if desired.
Layers
- Instructions (locked). Can be turned off or removed before exporting your print-ready file, if desired.
- Shape Overlay (locked). Must only be used as an overlay, and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
- Stitching (locked). Can be made visible to show where stitching will be located.
- Guides (locked). Can be made visible to show both stitching and corners of the graphic. Useful if the shape overlays have been removed or turned off.
- Design. Should be used to create and supply your design.
Artwork Requirements
Artwork must be supplied:
- With any fonts outlined
- With any images embedded
- Including the document bleed
- With any template elements (such as lines, boxes and markings) removed
- As either PDF (preferred), AI or EPS format
Please also refer to our full list of artwork requirements.
Considerations
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.
Important content, such as logos and text, should not escape the safe areas or wrap around the corners, as this would result an unsatisfactory appearance.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
