Replacement Graphics for Roller Banners
Product Overview
These replacement graphics are all you need to completely re-skin a Legend Roller Banner.
UNIT AND HEADER RAIL NOT INCLUDED WITH REPLACEMENT GRAPHICS.
- Bespoke-printed graphic printed on anti-curl, anti-scuff, anti-glare Roller Banner material
- Graphic is set to our standard 2150mm height and includes a lower 150mm section which is hidden inside the unit mechanism when the roller banner is deployed
There is no additional charge for more than one design or artwork for your order, no matter how many graphics you are ordering or whether you are ordering single-sided or double-sided graphics.
Notice
Please note, our replacement graphics are specifically designed and sized for product hardware that we sell. Using our replacement graphics on hardware that is not from us or not completely identical to ours may result in non-fitting or ill-fitting graphics.
If you are ordering replacement graphics for a unit you have previously purchased form us, please quote the original order ID. This will aid us in ensuring you have the most suitable replacement graphic for the hardware. This is especially important in cases where supplier hardware has altered slightly in the past, and where our latest templates may not be the required size for your model.
Artwork Templates
| INDD | AI | EPS | ||||
|---|---|---|---|---|---|---|
| 850mm × 2150mm Roller Banner | ||||||
| 1000mm × 2150mm Roller Banner | ||||||
These templates will help you create your design at the correct size, shape and proportion for the Replacement Graphics for Roller Banners, and are setup at 20% scale of full size.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn't interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
